I cannot log in to a Technicolor TC7200 router
I just got a Technicolor TC7200 router from my local DNA shop as part of the home broadband. I need to change some settings but cannot log in to the router. I have used both admin/admin for the username and password and also left them both blank. It just says "Given username and/or password is/are wrong". I have already set a static IP.
Follow this post
0
followers
Hi Nigel!
You were on the right track, but the default login is a combination of the two you tried: the username can be left blank, and the password is admin.
That worked. Thank you!
How do i log in to my router (TC7200)
Hello!
To log in type http://192.168.0.1 in your browser, the username and password sections are left empty, press log in.
Regards,
I'm also trying to log in. Leaving the username and password sections empty doesn't work. It says
Given username and/or password is/are wrong
Hi,
please try signing in to http://192.168.0.1 , leave username empty but try the password admin and click login.
It doesn't work, I have also tried to hard reset the router.
Hello!
If this modem is purchased somewhere else than DNA the log in information can be different, i suggest you check the user manual if there is some different username or password when logging in.
If the modem is purchased from DNA it should work with leaving everything empty or by leaving username empty and using "admin" as password. If the modem is purchased from DNA i suggest you visit a DNA shop and ask if they can replace the one you have.
You can also call our technical support partner HS-Works 0600 305060 (1,98eur/min + mpm/pvm)
Regards,
Is there any way to retrieve my username and password on my router I unfortunately forgot it can anyone help me please
Hello,
That depends on which router you have. Please refer to the owners manual for the default username and password.
Regards,
i have TC-7200.d1l i tried everything but still i m not able to connect my router
Hi Bittu,
Did you buy the router from DNA? Have you checked that the internet connection itself is ok? You can see the wlan password on the router, there should be the text: _Salasana (WPA2-PSK): _and then the password.
You can find more instructions for this modem at : https://www.dna.fi/documents/15182/34009055/DNA...
or if you still are having problems after reading the manual, you can contact DNA customer care +358 44 144 044.
I have the tc7200 al of the sudden my internet connection is cut off. What do i do? I tried troubleshooting it both software and hardware nothing works. Please help
Hi,
Please contact our customer service at 044 144 044 so we can check if everything is in order with the subscription and find a solution to this problem.
Regards,
Hi how to set bridge mode technicolor tc7200.d2
Thanks
Hi Christopher,
you can find instructions for this here: https://www.dna.fi/kayttoohjeet-ja-paivitysohje... -> Laajakaista ja Modeemit-> Technicolor TC7200-> Asennus ja käyttöönotto.
So when the modem is on , you go to the settings page http://192.168.0.1. Username is left empty and password is admin. Then press "Login". Choose "Network"-> "Portbase Passthrough" and there you can enable the ports you want -> "Apply".
Hi i want to know how to set bridge mode technicolor tc7200.d2
english instruction please
Thank you in advance
Hi,
The complete instructions for the modem is only available in Finnish via DNA. By following the previously written instructions you should be able to set the modem to bridge mode.
Regards,
HI ma'am
Still not resolve my query how to bridge technicolor tc7200.d2
thanks
Hi Christopher,
above in my previous reply there are instructions: When the modem is on , you go to the settings page http://192.168.0.1. Username is left empty and password is admin. Then press "Login". Choose "Network"-> "Portbase Passthrough" .
When you come to the "Portbase Passthrough" (you can find a picture of how it should look like, at page 22 here: https://www.dna.fi/documents/15182/34009055/DNA... )
, then you can see those different ports. If you want to change a specific port to bridge mode, you choose "enable" for that port and "apply". In the pdf instruction there´s also information, that this bridge feature might not be available in older software versions.
I hope this information was helpful.
Hi
i select network but i can't see the "Portbase Passthrough"
my modem is technicolor tc7200.d2|
please see attach photo
Thanks
Attached file:

Hi Christopher,
I think this can only get sorted out if you would call DNA customer care +358 44 144 044, please do that. Because we need the CM MAC code of your modem now to check the service, and then it can also be checked if you actually have got the latest software version. If the modem is bought from DNA it should all be fine and fixable; if it is bought from some other provider it might be that the software isn´t the same / compatible and doesn´t go along with our instructions.
how can i change the password?
Hi brags,
To change the password, go to the settings page http://192.168.0.1. Username is left empty and password is admin. Then press "Login". After logging in you should find a "Password" option in the left navigational column. From there you can change the password.
Regards,
Christopher we have the same problem! we only get limited option Huhu can we fix this? because i already tried reseting my router then login password admin then user empty but still this is still the option i still have, i want to have the port forwarding for games etc etc
Please help i want the full option 🙁
Hi Matthew,
if you are a DNA customer, you could call DNA Customer Care +358 44 144 044, then it can be checked if you have got the latest software version of the Technicolor modem, when you give the CM MAC code.
Good Day
my modem is technicolor tc7200.d2|
why parent control
Blocked Domain List is not working
i set the wedsite i want to block but still i can access them?
Good Day
my modem is technicolor tc7200.d2|
why parent control
Blocked Domain List is not working
i set the website i want to block but still i can access them?
can anyone guide me step by step
Thank you
Attached file:

Hi John,
I checked the issue with our technical support team, and there is currently no solution for this problem, we are sorry for the inconvenience.
Regards,
"How to set Wifi password on Technicolor TC7200 modem"
https://www.youtube.com/watch?v=Nc06qpRgDgM
Just try;
USER: admin
PASSWORD: password
It works on my model TC7200
sir
i m unable to login,
after putting password admin also this message is shown.
Given username and/or password is/are wrong
Hi,
you can try to reset your modem, that might be helpful.
may router is tc7200.d2p your given password admin-admin is not working and the password left blank and password admin is wrong and password admin and password sky is wrong pls help me what is the password in may router tc7200.d2p pls reply
Hi John,
please reset your modem.
Here is DNA:s instructions for the Technicolor TC7200 router: https://www.dna.fi/documents/15182/34009055/DNA...
At page 13 in this PDF; there is information about that the settings page is http://192.168.0.1 . Username should be left empty and password is admin with small letters.
Hey can you help me why I can port forward my router please tell me
I've already login but I can find the port forward
Hi Ralph,
if you are using the Tecnicolor TC 7200 router as well, then all the instructions that we have available for this modem can be found at the webpage:
https://www.dna.fi/documents/15182/34009055/DNA...
DNA is co-operating with a separate device support HS Works, so if the customer needs any further device support like this, you can call HS Works 0600 305060 (1,98eur/min + mpm/pvm) or check if you can find more instructions on the manufacturers (Technicolors) own webpages.
I need to change some settings to my router but can't log in to the router i always blank the username and password i write admin it says "Given username and/or password is/are wrong" you help me whai i do
Hi Karan,
You can try to reset the modem by pressing and holding the little reset button on the modem, that way the username and password should be reset to default.
Regards,
Never buy Technicolor/Thomson router/modem unless you want a headache.
Their routers have serious weird issues with firmware.
Internet sudden disconnect for few seconds to 20 minutes, dns request fails, unable to access router page, more than one connections to router causes connect disconnect issues, torrents freezes router, ping delays 1000-4000ms, etc.
Read this too: http://blog.szynalski.com/2015/05/technicolor-t...
Default router ip solution doesn't work, just reduces issues if on one computer is connected to router.
if only one computer is connected to router.
Hi.
How can i change my router password from admin to my personalized pw. Everytime i change it then i will click apply it will just go back to the page wherein i need to put my username and pazsword and retype password. How can i change the username as well as the password? Please see screenshot
Attached file:

Hi Elppa,
normally that should work when you just re-enter the password as well and press "apply". Also try to reset the modem/ restore the factory defaults. You can test another internet browser as well and another computer. It that doesn´t work, we cannot unfortunately give any further device support at this support site; but you can then contact the HS Works device support and you can find their contact number above.
my password is not changing it is showing
error connecting one or more entries
Hi Nikhil,
thank you for contacting us. Please check the previous answer above.
now it is not being logged in also ,earlier i used to login by leaving username empty and password:admin but now i m not able to login with these credentials ..plz help i have every thing
Hi Nikhil,
As mentioned above; you can try to reset the modem by pressing and holding the little reset button on the modem, that way the username and password should be reset to default.
Regards,
it was so helpful
thanks a lot DNA Linda
i just left the user empty and put the word "admin" as the password
TC7200 .D1
Login details:
UserName
Password: admin
Im kind of confused to what is the default username and password? Where can I get it? I've read the manual countless of times. I still can't connect my pc to the internet. I have tc7200.d2 btw
Hi Teya,
If you mean the default username and password for the settings page, they are as mentioned above: username is left blank and password is admin.
If you mean how to connect to the modem via WLAN, the default SSID and password can be found on the sticker on the modem itself.
Regards,
I have TC7200 .D1l modem everythings seems normal but i can not access this modem by remote access. when i try 192.168.0.1 the password is correct but if i try to access from remote the same user and password doesn't work.
what should i do ?
Thank you
You can again try to reset the modem/ restore the factory defaults. You can test another internet browser as well and another computer. After the reset, try to login by leaving the username empty and password should be admin . If that doesn´t work, we cannot unfortunately give any further device support at this support site; but you can then contact the HS Works device support and you can find their contact number above in this conversation.
The Username is blank and the Password is admin